This document describes the standard options most binaries should have as well as some which are common between most binaries of the same type.
Common options
Option | Supported by | Description
|
---|
Client options
Option | Supported by | Description
|
---|
Server options
Option | Supported by | Description
|
---|
| roard | µRoarD | SavannahIce? | rpld |
|
---|
--daemon | Yes | Yes | No | Yes | Bring the server into background after init
|
---|
--location | Yes | No | No | Yes | Set lion readable location of server
|
---|
--description | Yes | No | No | Yes | Set lion readable description of server
|
---|
--contact | Yes | No | No | Yes | Set contact for this server
|
---|
--serial | Yes | No | No | Yes | Set serial for this device or server (for embedded devices only)
|
---|
--uiurl | Yes | No | No | Yes | Set URL for userinterface of this device or server (for embedded devices only)
|
---|
--rate | Yes | Yes | No | No | Set server rate
|
---|
--bits | Yes | No | No | No | Set server bits
|
---|
--chans | Yes | Yes | No | No | Set server channels
|
---|
-o | Yes | No | Yes | No | Set the driver
|
---|
-O | Yes | Yes | Yes | No | Set the device
|
---|
-oO | Yes | No | Yes | No | et output options
|
---|
-oN | Yes | No | Yes | No | Adds another output
|
---|
--list-driver | Yes | No | Yes | No | List all drivers (default driver: (autodetect))
|
---|
-s | Yes | No | No | No | Use DRV as input driver
|
---|
-S | Yes | Yes | No | No | Use DEV as input device
|
---|
-sO | Yes | No | No | No | Use OPTS as input options
|
---|
-sN | Yes | No | No | No | Adds another source
|
---|
--list-sources | Yes | No | No | No | List all sources
|
---|
--tcp | Yes | Yes | Yes | Yes | Use TCP listen socket
|
---|
--unix | Yes | Yes | Yes | Yes | Use UNIX Domain listen socket (default)
|
---|
--decnet | Yes | Yes | Yes | Yes | use DECnet listen socket
|
---|
--port | Yes | Yes | Yes | Yes | TCP Port to bind to
|
---|
--bind | Yes | Yes | Yes | Yes | IP/Hostname to bind to
|
---|
--proto | Yes | No | Yes | Yes | Use PROTO as protocol on Socket
|
---|
--list-proto | Yes | No | No | No | List supported protocols
|
---|
--new-sock | Yes | No | Yes | Yes | Parameters for new socket follow
|
---|
--slp | Yes | No | No | Yes | Enable OpenSLP support
|
---|
--x11 | Yes | No | No | No | Enable X11 support
|
---|
--no-listen | Yes | Yes | Yes | Yes | Do not listen for new clients
|
---|
--client-fh | Yes | Yes | Yes | Yes | Comunicate with a client over this handle
|
---|
--close-fh | Yes | No | Yes | Yes | Closes the given fh
|
---|
Options of applications using libroar
Option | Supported by | Description
|
---|