source: roaraudio/include/libroar/libroar.h @ 3056:115aae09543d

Last change on this file since 3056:115aae09543d was 3056:115aae09543d, checked in by phi, 14 years ago

use the test macro for signal.h

File size: 3.4 KB
Line 
1//libroar.h:
2
3/*
4 *      Copyright (C) Philipp 'ph3-der-loewe' Schafft - 2008, 2009
5 *
6 *  This file is part of libroar a part of RoarAudio,
7 *  a cross-platform sound system for both, home and professional use.
8 *  See README for details.
9 *
10 *  This file is free software; you can redistribute it and/or modify
11 *  it under the terms of the GNU General Public License version 3
12 *  as published by the Free Software Foundation.
13 *
14 *  libroar is distributed in the hope that it will be useful,
15 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *  GNU General Public License for more details.
18 *
19 *  You should have received a copy of the GNU General Public License
20 *  along with this software; see the file COPYING.  If not, write to
21 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 *  NOTE for everyone want's to change something and send patches:
24 *  read README and HACKING! There a addition information on
25 *  the license of this document you need to read before you send
26 *  any patches.
27 *
28 *  NOTE for uses of non-GPL (LGPL,...) software using libesd, libartsc
29 *  or libpulse*:
30 *  The libs libroaresd, libroararts and libroarpulse link this lib
31 *  and are therefore GPL. Because of this it may be illigal to use
32 *  them with any software that uses libesd, libartsc or libpulse*.
33 */
34
35#ifndef _LIBROAR_H_
36#define _LIBROAR_H_
37
38#define ROAR_DBG_PREFIX  "libroar"
39
40#include <roaraudio.h>
41
42#include <stdarg.h>
43
44#ifdef ROAR_HAVE_WAIT
45#include <sys/wait.h>
46#endif
47
48#ifdef ROAR_HAVE_H_FCNTL
49#include <fcntl.h>
50#endif
51
52#ifdef ROAR_HAVE_H_SIGNAL
53#include <signal.h>
54#endif
55
56#ifdef ROAR_HAVE_BSDSOCKETS
57
58#ifndef ROAR_TARGET_WIN32
59#include <sys/socket.h>
60#ifdef ROAR_HAVE_IPV4
61#include <netinet/in_systm.h>
62#include <netinet/in.h>
63#include <netinet/ip.h>
64#endif
65#include <sys/uio.h>
66#endif
67#ifdef ROAR_HAVE_LIBDNET
68#include <netdnet/dn.h>
69#include <netdnet/dnetdb.h>
70#endif
71#ifdef ROAR_HAVE_IPX
72#include <netipx/ipx.h>
73#endif
74
75#endif /* ROAR_HAVE_BSDSOCKETS */
76
77#ifdef ROAR_HAVE_LIBSSL
78#include <openssl/bio.h>
79#include <openssl/evp.h>
80#endif
81
82#ifdef ROAR_HAVE_LIBSLP
83#include <slp.h>
84#endif
85
86#include "error.h"
87#include "config.h"
88#include "debug.h"
89#include "memmgr.h"
90#include "stack.h"
91#include "buffer.h"
92#include "nnode.h"
93#include "vio_ctl.h"
94#include "vio.h"
95#include "vio_cmd.h"
96#include "vio_ops.h"
97#include "vio_string.h"
98#include "vio_magic.h"
99#include "vio_bio.h"
100#include "vio_stdio.h"
101#include "vio_stack.h"
102#include "vio_jumbo.h"
103#include "vio_pipe.h"
104#include "vio_socket.h"
105#include "vio_proto.h"
106#include "vio_select.h"
107// dstr needs to have access to all other VIOs, so it must be included last
108#include "vio_dstr.h"
109#include "client.h"
110#include "basic.h"
111#include "stream.h"
112#include "simple.h"
113#include "cdrom.h"
114#include "auth.h"
115#include "socket.h"
116#include "ctl.h"
117#include "meta.h"
118#include "file.h"
119#include "acl.h"
120#include "pinentry.h"
121#include "sshaskpass.h"
122#include "roarslp.h"
123
124// some basic macros:
125#define ROAR_MAX2(a,b) ((a) > (b) ? (a) : (b))
126#define ROAR_MIN2(a,b) ((a) < (b) ? (a) : (b))
127
128#define ROAR_MAX3(a,b,c) ROAR_MAX2(ROAR_MAX2(a,b),c)
129#define ROAR_MIN3(a,b,c) ROAR_MIN2(ROAR_MIN2(a,b),c)
130
131#define ROAR_MAX4(a,b,c,d) ROAR_MAX2(ROAR_MAX2(a,b),ROAR_MAX2(c,d))
132#define ROAR_MIN4(a,b,c,d) ROAR_MIN2(ROAR_MIN2(a,b),ROAR_MIN2(c,d))
133
134#define ROAR_MAX ROAR_MAX2
135#define ROAR_MIN ROAR_MIN2
136
137#endif
138
139//ll
Note: See TracBrowser for help on using the repository browser.