Line | |
---|
1 | .\" RoarAudio |
---|
2 | .TH "roardecnet" "7" "August 2008" "RoarAudio" "System Manager's Manual: RoarAuido" |
---|
3 | |
---|
4 | .SH NAME |
---|
5 | roardecnet \- Tips for DECnet users or RoarAudio |
---|
6 | |
---|
7 | .SH SYNOPSIS |
---|
8 | |
---|
9 | roard -n [OPTIONS...] ... |
---|
10 | |
---|
11 | roarclient --server node:: [OPTIONS...] ... |
---|
12 | |
---|
13 | .SH "DESCRIPTION" |
---|
14 | This manpage lists some tips for use of RoarAudio over DECnet. |
---|
15 | |
---|
16 | .SH "BASICS" |
---|
17 | If DECnet support is compiled in there the option '\fB-n\fR' of \fBroard\fR(1). |
---|
18 | If you set it than the demon will listen via DECnet. |
---|
19 | You may use the option '\fB-b\fR' to set the object name. |
---|
20 | Nodenames given via '\fB-b\fR' are ignored. |
---|
21 | Example: |
---|
22 | roard -n |
---|
23 | roard -n -b ::myobject |
---|
24 | |
---|
25 | If you use the default object local clients should find there way to the server. |
---|
26 | For remote clients or if you use a non default object it is needed to give a |
---|
27 | server address in a form listent below. |
---|
28 | |
---|
29 | .SH "SERVER ADDRESS" |
---|
30 | The server address for DECnet is in one of the following forms: |
---|
31 | \fBnode::\fR, \fBnode::object\fR, \fB::object\fR, \fB::\fR |
---|
32 | This is the way to specify a DECnet connection to node \fBnode\fR's |
---|
33 | object \fBobject\fR. Both may be omitted to use defaults. Default |
---|
34 | node name is local hosts node name. |
---|
35 | Examples: |
---|
36 | mynode:: connect to \fBmynode\fR |
---|
37 | ::roar connect to local object \fBroar\fR |
---|
38 | yournode::yourroard connect to \fByournode\fR's object \fByourroard\fR |
---|
39 | |
---|
40 | .SH "SEE ALSO" |
---|
41 | \fBroard\fR(1), |
---|
42 | \fBroartips\fR(7), |
---|
43 | \fBlibroar\fR(7). |
---|
44 | |
---|
45 | .\"ll |
---|
Note: See
TracBrowser
for help on using the repository browser.