1 | #RoarAudio Configuration |
---|
2 | |
---|
3 | # --- [ General Options ]--- |
---|
4 | |
---|
5 | # Start roard? YES or NO: |
---|
6 | ROARD='YES' |
---|
7 | |
---|
8 | # Additionl Options to pass to roard, should normally be empty |
---|
9 | ROARD_OPTS='' |
---|
10 | |
---|
11 | # Should we run roard in realtime mode: |
---|
12 | # NO - Don't run in realtime mode |
---|
13 | # YES - Run in realtime mode |
---|
14 | # DOUBLE - Try to run in a 'very realtime mode' |
---|
15 | ROARD_REALTIME='YES' |
---|
16 | |
---|
17 | # PIDFile for roard: |
---|
18 | # Default is enabled, at /var/run/roard.pid |
---|
19 | # Set to empty string to disable. |
---|
20 | #PIDFILE='/var/run/roard.pid' |
---|
21 | |
---|
22 | # Location of roard: |
---|
23 | # This is a lion readable location of the roard used |
---|
24 | # for Zero Conf locating of a RoarAudio server on the |
---|
25 | # Network. To use Zero Conf enable SLP (see below). |
---|
26 | #ROARD_LOCATION='' |
---|
27 | |
---|
28 | # Description for roard: |
---|
29 | # This is a lion readable description for the server. |
---|
30 | # It is used for Zero Conf like the location above. |
---|
31 | #ROARD_DESCRIPTION='' |
---|
32 | |
---|
33 | # Default location for roard: |
---|
34 | # Set this to a remote address and disable local roard |
---|
35 | # to run a network only setup. |
---|
36 | # ROARAUDIO_DEFAULT_SOCKET='server.local' |
---|
37 | |
---|
38 | # --- [ Network ] --- |
---|
39 | |
---|
40 | # Listening socket's address family: |
---|
41 | # UNIX - Local connections only |
---|
42 | # TCP - Connections via TCP/IP |
---|
43 | # DECnet - Connections via DECnet |
---|
44 | ROARD_AF='UNIX' |
---|
45 | |
---|
46 | # Socket to listen on (UNIX): |
---|
47 | ROARD_SOCKET='/tmp/roar' |
---|
48 | |
---|
49 | # Port to listen on (TCP): |
---|
50 | # ROARD_PORT=16002 |
---|
51 | |
---|
52 | # Host/Nodename to listen on (TCP, DECnet): |
---|
53 | # use a value of '0.0.0.0' to listen publicly for TCP. |
---|
54 | # ROARD_HOST='0.0.0.0' |
---|
55 | |
---|
56 | # Object to listen on (DECnet): |
---|
57 | # ROARD_OBJECT='roar' |
---|
58 | |
---|
59 | # Annouce us via OpenSLP: |
---|
60 | # Set to YES or NO. |
---|
61 | # In case of YES roarclients can autolocat this server |
---|
62 | # on the network. |
---|
63 | ROARD_SLP='NO' |
---|
64 | |
---|
65 | # --- [ EsounD Emulation ] --- |
---|
66 | |
---|
67 | # Listen socket for server side EsounD emulation: |
---|
68 | # NONE - Disable EsounD emulation |
---|
69 | # UNIX - Local connections only |
---|
70 | # TCP - Connections via TCP/IP |
---|
71 | ROARD_EMUL_ESD_AF='NONE' |
---|
72 | |
---|
73 | # --- [ RSound Emulation ] --- |
---|
74 | |
---|
75 | # Listen socket for server side RSound emulation: |
---|
76 | # NONE - Disable RSound emulation |
---|
77 | # UNIX - Local connections only |
---|
78 | # TCP - Connections via TCP/IP |
---|
79 | # DECnet - Connections via DECnet |
---|
80 | ROARD_EMUL_RSOUND_AF='NONE' |
---|
81 | |
---|
82 | # --- [ Other listen sockets ] --- |
---|
83 | |
---|
84 | # List of additional listen profiles to enable: |
---|
85 | # To get a list run: roard --list-profiles |
---|
86 | # Default: (empty) |
---|
87 | #ROARD_PROFILES='' |
---|
88 | |
---|
89 | # --- [ Audio and Devices ] --- |
---|
90 | |
---|
91 | # Samplerate, number of channels and bits per sample: |
---|
92 | # ROARD_RATE=44100 |
---|
93 | # ROARD_CHANNELS=2 |
---|
94 | # ROARD_BITS=32 |
---|
95 | |
---|
96 | # Sound Driver and Device: |
---|
97 | # To get a list run: roard --list-driver |
---|
98 | # Don't forget to include 'sync' in the options unless |
---|
99 | # you REALLY, REALLY know what you are doing |
---|
100 | # ROARD_DRIVER='oss' |
---|
101 | # ROARD_DEVICE='/dev/dsp' |
---|
102 | # ROARD_DRIVER_OPTIONS='sync' |
---|
103 | |
---|
104 | # The Mixer Driver and Device: |
---|
105 | # To get a list run: roard --list-mixers |
---|
106 | # ROARD_MIXERDRV='oss' |
---|
107 | # ROARD_MIXERDEV='/dev/mixer' |
---|
108 | # ROARD_MIXER_OPTIONS='' |
---|
109 | |
---|
110 | # --- [ Sources ] --- |
---|
111 | |
---|
112 | # Radionoise source: |
---|
113 | # The radionoise source is a noise source at -102dB. |
---|
114 | # This is used to avoid icecast to timeout on silence. |
---|
115 | # See Docs for more infos. |
---|
116 | # ROARD_SOURCE_RADIONOISE='NO' |
---|
117 | |
---|
118 | # --- [ RoleStack ] --- |
---|
119 | |
---|
120 | # Push entries to the RoleStack: |
---|
121 | # See Docs on RoleStack for more infos. |
---|
122 | # Defaults to roard's internal defaults. |
---|
123 | # ROARD_ROLESTACK='' |
---|
124 | |
---|
125 | # --- [ Auth Options ] --- |
---|
126 | |
---|
127 | # Access levels: |
---|
128 | # Those options set the access level for clients. |
---|
129 | # The guest option sets the access level for guest connections. |
---|
130 | # The trust option sets the access level for connections |
---|
131 | # successfully used the TRUST auth. |
---|
132 | # ROARD_ACCLEV_GUEST='' |
---|
133 | # ROARD_ACCLEV_TRUST='' |
---|
134 | |
---|
135 | # Authfile: |
---|
136 | # This can be used to generate an authfile. |
---|
137 | # This may be needed for example by the ESD protocol emulation. |
---|
138 | # ROARD_AUTHFILE_FILENAME='' |
---|
139 | # ROARD_AUTHFILE_TYPE='' |
---|
140 | # ROARD_AUTHFILE_ACCLEV='' |
---|
141 | |
---|
142 | # --- [ Permitions ] --- |
---|
143 | |
---|
144 | # User and Group to run roard with: |
---|
145 | # Note: Users in the same group my access roard |
---|
146 | # if runnung in UNIX mode. |
---|
147 | # ROARD_USER='roard' |
---|
148 | # ROARD_GROUP='audio' |
---|
149 | |
---|
150 | # --- [ Security ] --- |
---|
151 | |
---|
152 | # Directory to chroot to: |
---|
153 | # Use empty value to disable. |
---|
154 | # Directory may/should be completly empty. |
---|
155 | #ROARD_CHROOT='' |
---|
156 | |
---|
157 | #ll |
---|