[1047] | 1 | #RoarAudio Configuration |
---|
| 2 | |
---|
| 3 | # --- [ General Options ]--- |
---|
| 4 | |
---|
| 5 | # Start roard? YES or NO: |
---|
| 6 | ROARD='YES' |
---|
| 7 | |
---|
| 8 | # Additionl Options to pass to roard, should normally be empty |
---|
| 9 | ROARD_OPTS='' |
---|
| 10 | |
---|
| 11 | # Should we run roard in realtime mode: |
---|
| 12 | # NO - Don't run in realtime mode |
---|
| 13 | # YES - Run in realtime mode |
---|
| 14 | # DOUBLE - Try to run in a 'very realtime mode' |
---|
[2585] | 15 | ROARD_REALTIME='YES' |
---|
| 16 | |
---|
| 17 | # PIDFile for roard: |
---|
| 18 | # Default is enabled at /var/run/roard.pid |
---|
| 19 | # Set to empty string to disable. |
---|
| 20 | #PIDFILE='/var/run/roard.pid' |
---|
| 21 | |
---|
| 22 | # Location of roard: |
---|
| 23 | # This is a human readable location of the roard used |
---|
| 24 | # for Zero Conf locating of a RoarAudio server on the |
---|
| 25 | # Network. To use Zero Conf enable SLP (see below). |
---|
| 26 | #ROARD_LOCATION='' |
---|
[1047] | 27 | |
---|
| 28 | # Default location for roard: |
---|
| 29 | # Set this to a remote address and disable local roard |
---|
| 30 | # to run a network only setup. |
---|
| 31 | # ROARAUDIO_DEFAULT_SOCKET='server.local' |
---|
| 32 | |
---|
| 33 | # --- [ Network ] --- |
---|
| 34 | |
---|
| 35 | # Listening socket's address family: |
---|
| 36 | # UNIX - Local connections only |
---|
| 37 | # TCP - Connections via TCP/IP |
---|
| 38 | # DECnet - Connections via DECnet |
---|
| 39 | ROARD_AF='UNIX' |
---|
| 40 | |
---|
| 41 | # Socket to listen on (UNIX): |
---|
| 42 | ROARD_SOCKET='/tmp/roar' |
---|
| 43 | |
---|
| 44 | # Port to listen on (TCP): |
---|
| 45 | # ROARD_PORT=16002 |
---|
| 46 | |
---|
| 47 | # Host/Nodename to listen on (TCP, DECnet): |
---|
| 48 | # use a value of '0.0.0.0' to listen publicly for TCP. |
---|
| 49 | # ROARD_HOST='0.0.0.0' |
---|
| 50 | |
---|
| 51 | # Object to listen on (DECnet): |
---|
| 52 | # ROARD_OBJECT='roar' |
---|
| 53 | |
---|
[2585] | 54 | # Annouce us via OpenSLP: |
---|
| 55 | # Set to YES or NO. |
---|
| 56 | # In case of YES roarclients can autolocat this server |
---|
| 57 | # on the network. |
---|
| 58 | ROARD_SLP='NO' |
---|
| 59 | |
---|
| 60 | # --- [ EsounD Emulation ] --- |
---|
| 61 | |
---|
[3690] | 62 | # Listen socket for server side EsounD emulation: |
---|
[2585] | 63 | # NONE - Disable EsounD emulation |
---|
| 64 | # UNIX - Local connections only |
---|
| 65 | # TCP - Connections via TCP/IP |
---|
| 66 | ROARD_EMUL_ESD_AF='NONE' |
---|
| 67 | |
---|
[3690] | 68 | # --- [ RSound Emulation ] --- |
---|
| 69 | |
---|
| 70 | # Listen socket for server side RSound emulation: |
---|
| 71 | # NONE - Disable RSound emulation |
---|
| 72 | # UNIX - Local connections only |
---|
| 73 | # TCP - Connections via TCP/IP |
---|
| 74 | # DECnet - Connections via DECnet |
---|
| 75 | ROARD_EMUL_RSOUND_AF='NONE' |
---|
| 76 | |
---|
[4136] | 77 | # --- [ Other listen sockets ] --- |
---|
| 78 | |
---|
| 79 | # List of additional listen profiles to enable: |
---|
| 80 | # To get a list run: roard --list-profiles |
---|
| 81 | # Default: (empty) |
---|
| 82 | #ROARD_PROFILES='' |
---|
| 83 | |
---|
[1047] | 84 | # --- [ Audio and Devices ] --- |
---|
| 85 | |
---|
| 86 | # Samplerate, number of channels and bits per sample: |
---|
| 87 | # ROARD_RATE=44100 |
---|
| 88 | # ROARD_CHANNELS=2 |
---|
| 89 | # ROARD_BITS=16 |
---|
| 90 | |
---|
| 91 | # Sound Driver and Device: |
---|
| 92 | # To get a list run: roard --list-driver |
---|
[1147] | 93 | # Don't forget to include 'sync' in the options unless |
---|
| 94 | # you REALLY, REALLY know what you are doing |
---|
[1047] | 95 | # ROARD_DRIVER='oss' |
---|
| 96 | # ROARD_DEVICE='/dev/dsp' |
---|
[1147] | 97 | # ROARD_DRIVER_OPTIONS='sync' |
---|
[1047] | 98 | |
---|
| 99 | # --- [ Permitions ] --- |
---|
| 100 | |
---|
| 101 | # User and Group to run roard with: |
---|
| 102 | # Note: Users in the same group my access roard |
---|
| 103 | # if runnung in UNIX mode. |
---|
| 104 | # ROARD_USER='roard' |
---|
| 105 | # ROARD_GROUP='audio' |
---|
| 106 | |
---|
[2585] | 107 | # --- [ Security ] --- |
---|
| 108 | |
---|
| 109 | # Directory to chroot to: |
---|
| 110 | # Use empty value to disable. |
---|
| 111 | # Directory may/should be completly empty. |
---|
| 112 | #ROARD_CHROOT='' |
---|
| 113 | |
---|
[1047] | 114 | #ll |
---|